|Hashrate & Power|
|Power efficiency on wall @25℃, J/TH (1-1)||93.12||99.88|
|Power efficiency on wall @40℃, J/TH (1-2)||99.64||106.87|
|Reference power on wall, Watt (1-3)||1350||1597|
|DC input voltage range, Volt (1-4)||11.60||12.00||13.00|
|DC input current range, Amp (1-5)||112.5||137.7|
|Adapted AC/DC output power requirement, Watt (1-6)||1485||1650|
|Quantity of hash chips||189|
|Quantity of hash boards||3|
|Networking connection mode||RJ45 ethernet 10/100M|
|Miner Size (Length*Width*Hight, w/o package), mm||350*135*158|
|Net weight, kg||4.2|
|Noise, dBA @25℃ (2-1)||76|
|Operation temperature, ℃||0||25||40|
|Storage temperature, ℃||-40||25||85|
|Operation humidity, RH||5%||95%|
(1-1) Refers PSU power conversion efficiency of 93%
(1-2) Refers PSU power conversion efficiency of 93%
(1-3) Min condition: 25℃, min J/TH, typical hashrate
Max condition: 40℃, max J/TH, max hashrate
Refers PSU power conversion efficiency of 93%
(1-4) Caution: Wrong input voltage may probably cause miner damaged
(1-5) Typ condition: min reference power, typical DC input voltage
Max condition: max reference power, min DC input voltage
(1-6) Min condition: 40℃, max J/TH, max hashrate,
PSU output power should be no less than the min value to make sure mining stable.
Typical condition: (typical power) = (min power)/90%, leave power output margin for PSU.
Caution: It is strongly recommended that using typical power can make sure your miner can work
well. You can use one PSU to power multiple boards. Do not attempt to power one board with
more than one PSU. All PCI-E ports are required to plug in while powering up the board.
(2-1) Max condition: Fan is under max RPM(rotation per minute).